BioMAX™ CS

BioMAX™ CS

 

BioMAX ™CS

Minipleat HEPA Filters for Clean Rooms and High Purity Applications

  • Minipleat design ensures low resistance to airflow
  • Compact, lightweight extruded aluminum cell sides (CS models)
  • Gasket Seal or Gel Seal
  • Multiple Efficiency Options

BioMAX™ CS is a compact size minipleat HEPA filter designed to  meet the stringent requirements of today’s clean room applications.

BioMAX CS filters are engineered to provide the optimum combination of efficiency and airflow. They are used in a wide range of applications, including pharmaceutical facilities, hospitals, biotech laboratories and other environments where control and removal of airborne contaminants is of paramount importance in the protection of people, processes, and equipment. 

BioMAX™ CS Construction

Compact minipleat design saves energy

BioMAX CS filters are manufactured with a specialized thermoplastic adhesive bead (no aluminum separators) to maintain proper pleat separation and full utilization of the filter media. Precise spacing of the glue-bead separators ensures low resistance to airflow and reduced energy costs to the user.

 

Multiple efficiency options

Each minipleat pack is sealed into the filter frame with a white urethane adhesive designed specifically for high efficiency air filtration. BioMAX CS and V2000 filters are available in multiple efficiencies: 99.97%, 99.99%, and 99.999% on 0.3 microns.

 

Cell sides engineered to fit any existing housing

Cell sides (filter frames) for the BioMAX CS are constructed of heavy-duty anodized extruded aluminum. The extruded aluminum cell sides are available in several configurations to fit any existing frame system or air filter housing: Gasket seal, Gel seal, Reverse Gel seal, and others. BioMAX V2000 cell sides are constructed of heavy-duty sheet aluminum. (See reverse for additional information).

 

 

 

BioMAX™ CS Models

Gel Seal 

  • Constructed with a built-in channel in the filter frame which contains a non-flowing, non-hardening urethane gel sealant.
  • Designed for framing systems and housings equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage.
  • BioMAX CS with Gel Seal are available in cell side (filter frame) depths of 4 3/4”.

 

Reverse Gel Seal  

  • Constructed with the built-in gel channel located at the back of the upstream side of the filter. Placing the channel in this position enables the BioMAX CS filter to fit up into the housing to save space. Access to the filter is from the room side of the unit.
  • Designed for housings and ducted modules equipped with a “knife edge” seal. The knife edge inserts and submerges into the gel seal on the filter to prevent leakage.
  • Excellent replacement filter for permanently installed ducted ceiling modules.

 

Neoprene Gasket Seal

  • Constructed with a 3/4” wide by 1/4” thick closed cell neoprene gasket.
  • Designed for “lay-in” frame systems requiring filters with gaskets of this type. The filter should be secured into the holding frame by a clamping mechanism to prevent leakage.
  • Standard models are furnished with the gasket on the downstream face of the filter. Gaskets can be placed upstream or on both sides of the filter upon request.
  • BioMAX CS with Gasket Seal are available in cell side (filter frame) depths of 2 3/4”.
  • (Also available with wood cell sides upon request).

BioMAX™ CS Chart

 

Corporate Offices
P.O. Box 3186 - 625 West Hill Street (40208) - Louisville, KY 40201 - 800.757.5624 - 502.634.4796 - Fax: 502.637.2280 - E mail: info@kochfilter.com

Regional Sales Offices/Distribution Centers
Atlanta, GA - Detroit, MI - East Greenville, PA* - Houston, TX* - Indianapolis, IN - Kansas City, MO - Louisville, KY* - Madbury, NH - Nashville, TN - Mira Loma, CA*  
*Denotes manufacturing site. 

©2010 Koch Filter Corporation